Det finns flera vanliga anslutningsmetoder förUltra högtrycksslangar. The most common one is threaded connection, which is to install threaded connectors on both ends of the hose and then screw them together with the threaded interfaces on the equipment. This method is convenient for installation and disassembly, and is suitable for situations where the position of the equipment needs to be adjusted frequently, but it must be tightened during installation to prevent loosening and pressure läckage .
There is also a flange connection, aligning the flanges at both ends of the hose with the flanges of the equipment and fixing them with bolts. This connection method has good sealing performance and can withstand very high pressure. It is suitable for large equipment or fixed installation occasions. However, during installation, it is necessary to ensure that the gaskets between the flanges are intakt och bultarna dras åt jämnt .
Quick connector connection is also commonly used. It is like a plug and a socket. Just align the connector and insert it to connect, and pull it out to disconnect. This method is particularly fast to operate and is suitable for places where frequent disassembly and assembly are required, but it should be noted that the specifications of the connectors must match, otherwise it is easy to fall av .
Varje anslutningsmetod har sina egna fördelar och tillämpliga scenarier . Endast genom att välja rätt metod kan det ultrahögtryckslang som fungerar säkert och stabilt .
